Our country successfully prepared super-sized perovskite single crystals

Our country successfully prepared super-sized perovskite single crystals

Recently, a team led by Liu Shengzhong, a researcher of the Dalian Institute of Chemical Physics, Chinese Academy of Sciences, teamed up with Shaanxi Normal University to use a temperature-increasing crystallizing method to prepare an ultra-large-sized monocrystalline perovskite CH3NH3PbI3 crystal with a size exceeding 2 inches for the first time in the world. Perovskite single crystals with a size of more than 0.5 inches are reported. The relevant results have been published online in the "Advanced Materials" journal. Relevant experts believe that this result may promote a new revolution in optoelectronic devices.

Solar energy is an energy-rich and clean energy source. The rational and effective use of solar energy is an important way to solve human energy and environmental problems. At present, the use of solar energy includes solar thermal, solar photovoltaic cells, and solar hydrogen production. Among them, solar photovoltaic power generation technology can directly convert the energy of sunlight into electricity, and realize seamless connection with the current power supply network. It is the most convenient way of solar energy utilization.

Commercial solar cell products have a history of more than 60 years and are widely used in many fields. Although the cost of solar power technology has been significantly reduced, it is still higher than other energy supply prices. The development of solar cell devices with high conversion efficiency and low power generation cost is a goal that humanity has been pursuing.

Studies in recent years have found that a methylamino-halogenated lead halide material with a perovskite crystal structure has a high light absorption coefficient, a very long carrier transport distance, and a very low density of defect states, etc., in photovoltaic materials and lasers. Materials and luminescent materials have great application value and become one of the most important research hotspots in the world. At present, the photoelectric conversion efficiency of perovskite solar cells certified by the National Institute of Energy's Renewable Energy Laboratory (NREL) has reached 20.1%, which is close to the efficiency of monocrystalline silicon solar cells. At the same time, laser and light-emitting devices based on perovskite materials have also been reported, showing the broad application prospects of perovskite materials in the field of optoelectronics.

However, perovskite solar cells and other optoelectronic devices based on microcrystalline or amorphous thin films still face enormous challenges, such as being sensitive to water vapor, insufficient stability to atmosphere, heat, ultraviolet light, and the like. There are many crystal grains, grain boundaries, pores and surface defects in the microcrystalline perovskite film that can cause carrier recombination, which is a key issue that needs to be solved to further improve the solar energy conversion efficiency and other optoelectronic device performance.

In response to these problems, Liu Shengzhong's research team developed a method for the growth of large-size perovskite single crystals, and successfully produced super-sized single-crystal perovskite crystals with a size exceeding 2 inches.

The research team further found that the perovskite crystal material has a very high crystalline quality, a better light absorption range and a higher thermal stability compared to the thin film sample, and the luminescence peak of the material at 402 nm was found for the first time. The above research results show that this oversized single crystal has great commercial application value in the research and development of high-performance optoelectronic devices.

At the same time when the paper was published, an editor of "Advanced Materials" published a review article on the work and gave it a high evaluation. The review pointed out that the paper first reported a perovskite crystal with a size greater than 0.5 inches, which made it possible to directly compare the difference in properties between the polycrystalline film and the single crystal. The results show that compared to polycrystalline perovskite films, single-crystal perovskite solar cells can achieve better photoelectric conversion efficiency; at the same time, single-crystal devices are also due to crystal integrity and fewer defects. Has better stability. "Because single-crystal materials are the foundation of the modern semiconductor industry, electronics industry and optoelectronics industry, perovskite single crystal materials with excellent properties are likely to realize the innovation of polycrystalline perovskite-based devices and promote a new revolution in optoelectronic devices. (Reporter Yan Huimin)

1. Water Saving Wall Mounted Conceal Shower Set

2. Made of  High Grade Brass

3. Very good wear resistance and sealingall parts of the product are carefully checked

4. New modern luxury design, hot sell.

5. Green product, friendly to the environment.

6. Fit to the international standards.

7. Various kinds of shower set is available for your selection

Conceal Shower Set

Concealed Shower Set,Concealed Shower Mixer,Concealed Ceiling Shower Head,Concealed Shower Faucet Set

KaiPing HuiPu Shower Metalwork Industrial CO,LTD , https://www.hp-shower.com